Selecting a Configuration

<< Click to Display Table of Contents >>

Navigation:  Configuring Your Sound Card and MIDI Equipment > Using the MIDI Device Configuration Window > Managing Alternative MIDI Device Configurations >

Selecting a Configuration

 Previous pageReturn to chapter overviewNext page

prcarrowTo select a configuration that you have previously saved:

1.Choose the MIDI Device Configuration command from the Setup menu.

-- OR --

Type "qdc" for Quick Device Configuration.

2.In the MIDI Device Configuration Window, choose the Select command from the Config menu. Musician will display the MIDI Device Configuration dialog box.
3.In the dialog box, select one of your previously saved configurations.

If you have a song currently opened, then Musician will be able to fully play all of the song staves only if the device assignments for the staves are supported by the new configuration. If some of the staves are assigned to a device no longer in the current configuration, then you will need to use the Staff Setup window to reassign staves to devices in the new configuration.